20 Most Wanted Galvanized Anchor Bolts

12 Mar 2019

Powers Fastening Innovations 7768SD 5 8 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box

Powers Fastening Innovations 7768SD 5 8 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box
Powers Fastening Innovations 7768SD 5 8 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box

Powers Fastening Innovations 7768SD 5 8 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box. Heavy duty screw anchor with a finished hex head. Easy to identify and fully removable. Mechanically galvanized. Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits. Powers Fastening Innovations. Designed for consistent and reliable performance in cracked and untracked concrete.

Campbell 999 G Bolt Anchor Shackles Drop Forged Carbon Steel Galvanized 2 Trade 35 Ton Working Load Limit

Campbell 999 G Bolt Anchor Shackles Drop Forged Carbon Steel Galvanized 2 Trade 35 Ton Working Load Limit
Campbell 999 G Bolt Anchor Shackles Drop Forged Carbon Steel Galvanized 2 Trade 35 Ton Working Load Limit

Campbell 999 G Bolt Anchor Shackles Drop Forged Carbon Steel Galvanized 2 Trade 35 Ton Working Load Limit. Working load limit permanently shown on every shackle. Standard material: shackle bodies are drop-forged carbon steel. These the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). Design factor: 6 to 1; 999-G, safety meets the design requirements of federal RR-C-271, type IVA, grade A, class 3. Standard finish self-colored or galvanized to meet ASTM A-153. Shackle Bodies Are Drop-Forged Carbon Steel Galvanized to Meet ASTM A-153 C-999-G Shackles Meet the Design Requirements of Federal RR-C-271, Type IVA, Grade A, Class 3 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 999 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B 30.26? the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMITCountry of Origin: United States Coupon Headline: Carbon Bolt Type Anchor Shackles, Galvanized, C-999-GLong 2", Anchor Shackle, Bolt Type, Forged Carbon Steel, Galvanized Packaging: Industrial Box / Carton Table 2", Anchor Shackle, Bolt Type, Forged Carbon Steel, Galvanized UNSPSC V 7.0901: Hooks UPC: 020418075766 Catalog Weight: 45.00 lb Weight Each (lbs.), 40.00 lb Weight Per 100 Pieces (lbs), 4000 Working Load Limit Short Ton: 35 T. Tolerances 1 / 2", length by 1 / 8", width.

Simpson Strong Tie THDB62612HMG 5 8 Inch By 6 1 2 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62612HMG 5 8 Inch By 6 1 2 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box
Simpson Strong Tie THDB62612HMG 5 8 Inch By 6 1 2 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62612HMG 5 8 Inch By 6 1 2 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box. Tested per AC 193 to ensure outstanding performance in both cracked and uncraked concrete. Specialized heat treating process creates superior hardness at the tip to facilitate cutting. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provice outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Higher load capacity and vibration resistance. Mechanical Galvanized. The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. The head is stamped with anchor length in inches.

BRUFER GR 06 Galvanized Screw Pin Chain Anchor D Shackle 1 2 Inch 13Mm Bulk Pack Of 2 Pieces

BRUFER GR 06 Galvanized Screw Pin Chain Anchor D Shackle 1 2 Inch 13Mm Bulk Pack Of 2 Pieces
BRUFER GR 06 Galvanized Screw Pin Chain Anchor D Shackle 1 2 Inch 13Mm Bulk Pack Of 2 Pieces

BRUFER GR 06 Galvanized Screw Pin Chain Anchor D Shackle 1 2 Inch 13Mm Bulk Pack Of 2 Pieces. Screw collar pin can be removed totally from the body. Used for attaching ropes, anchors and chains for sailing, rigging or lifting. Use for attaching ropes, anchors and chains for sailing, rigging or lifting. Perfect for boating, sailing, marine and other harsh-condition applications. Galvanized for corrosion resistance and durability. BRUFER GR-06 Galvanized Chain Shackles come in a pack of 2 in a 1 / 2", size. 2-pack of 1 / 2", forged galvanized D shackles with screw pins. Pin diameter: 3 / 8", Mouth opening: 1-1 / 8".

Crosby 1019515 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 4 3 4 Ton Working Load Limit 3 4 Size

Crosby 1019515 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 4 3 4 Ton Working Load Limit 3 4 Size
Crosby 1019515 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 4 3 4 Ton Working Load Limit 3 4 Size

Crosby 1019515 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 4 3 4 Ton Working Load Limit 3 4 Size. Shackle finish is hot dip galvanized. can be used in tie down, towing, suspension or lifting applications. carbon anchor shackle. Crosby's bolt type anchor shackles can be used in tie down, towing, suspension or lifting applications. hot dip galvanized. forged-quenched tempered with alloy pins. The working load limit is 4-3 / 4 ton. Shackles are forged quenched and tempered with alloy pins. Crosby 1019490 Carbon Steel G-2130 Bolt Type Anchor Shackle, Galvanized, 3-1 / 4 Ton Working Load Limit, 5 / 8", Size.

CONFAST 1 2 X 2 3 4 Hot Dipped Galvanized Wedge Anchor Box Of 25

CONFAST 1 2 X 2 3 4 Hot Dipped Galvanized Wedge Anchor Box Of 25
CONFAST 1 2 X 2 3 4 Hot Dipped Galvanized Wedge Anchor Box Of 25

CONFAST 1 2 X 2 3 4 Hot Dipped Galvanized Wedge Anchor Box Of 25. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. WIDE RANGE OF SIZES - Insures proper fastener for best results. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation. Applications The anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. Environment The anchor is designed for use in a Damp environment. Torque Value To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft. HOT DIPPED GALVANIZED - Helps prevent rusting in moist environments. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Simpson Strong Tie FPBB 44 Black Powder-Coated 12-Gauge E-Z Base. Hole Diameter / Bit Diameter The anchor requires a 1 / 2", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 1 / 2". Length Anchor The length of the anchor is 2-3 / 4", Thread Length The length of the threads on the anchor is 1-1 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 2-1 / 4". Therefore, the anchor must be installed so that a minimum of 2-1 / 4", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1 / 8". This will ensure that the minimum embedment of 2-1 / 4", will be met. The 1 / 2", diameter anchor requires the hole in the fixture to be 5 / 8". Spacing between Anchors Each anchor must be spaced a minimum distance of 5", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 2", from an unsupported edge of the concrete.

DC Cargo Mall E Track Trailer Tie Down Rail Mounting Screws Kit 1 5 Galvanized Hex Head Bolts Nuts Washers 10 Pack

DC Cargo Mall E Track Trailer Tie Down Rail Mounting Screws Kit 1 5 Galvanized Hex Head Bolts Nuts Washers 10 Pack
DC Cargo Mall E Track Trailer Tie Down Rail Mounting Screws Kit 1 5 Galvanized Hex Head Bolts Nuts Washers 10 Pack

DC Cargo Mall E Track Trailer Tie Down Rail Mounting Screws Kit 1 5 Galvanized Hex Head Bolts Nuts Washers 10 Pack. They can also be removed by hand, with a screwdriver or drill, or with a typical wrench. Mounting fasteners installation kit for E track cargo tie-down system. Place the bolt and washer through the hole of the E track and through the hole in the surface, and fasten the nut on the other end of the bolt. Secure E track rails in trailers and trucks. The washer distributes the pressure of the nut evenly to prevent damage to the surface and keeps the nut tight. Made of durable steel that is galvanized to increase rust- and corrosion- resistance. To install, the bolts can be fastened manually, with a wrench, or with a screwdriver or drill. These hex bolts, nuts, and washers are made of steel which will tolerate rough elements and heavy use for years and is protected from corrosion and rust by hot-dip galvanization. The hex heads make these fasteners easy to use with everyday tools. The E track fastener pack comes with 10 each - bolts, nuts, and washers. All products that work with E tracks are compatible with A tracks as well. These hex bolts are great for metal box trucks or any surface less than 1.5", thick, with pre-drilled holes. Use a 7 / 16", diameter drive to fasten both bolts and nuts. They have a diameter of 1 / 4", and the bolts are 1.5", long. They are also available with 2", long bolts. 10 pack - 1 / 4", diameter x 1.5", long hex head bolts, flat washers, nuts. Use a 7 / 16", diameter drive to fasten both bolts and nuts.

CONFAST 3 4 X 5 1 2 Hot Dipped Galvanized Wedge Anchor Box Of 20

CONFAST 3 4 X 5 1 2 Hot Dipped Galvanized Wedge Anchor Box Of 20
CONFAST 3 4 X 5 1 2 Hot Dipped Galvanized Wedge Anchor Box Of 20

CONFAST 3 4 X 5 1 2 Hot Dipped Galvanized Wedge Anchor Box Of 20. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. WIDE RANGE OF SIZES - Insures proper fastener for best results. HOT DIPPED GALVANIZED - Helps prevent rusting in moist environments. Applications The anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Environment The anchor is designed for use in a Damp environment. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation. Torque Value To be set properly in the concrete, the anchor must be torqued to between 150 - 175 ft. Hole Diameter / Bit Diameter The anchor requires a 3 / 4", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 3 / 4". Length Anchor The length of the anchor is 5-1 / 2", Thread Length The length of the threads on the anchor is 3-1 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 3-1 / 4". Therefore, the anchor must be installed so that a minimum of 3-1 / 4", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1 / 2". This will ensure that the minimum embedment of 3-1 / 4", will be met. The 3 / 4", diameter anchor requires the hole in the fixture to be 1". Spacing between Anchors Each anchor must be spaced a minimum distance of 7-1 / 2", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3-3 / 4", from an unsupported edge of the concrete.

15 Galvanized Concrete Wedge Anchor Bolts 1 2 X 7 Includes Nuts Washers

15 Galvanized Concrete Wedge Anchor Bolts 1 2 X 7 Includes Nuts Washers
15 Galvanized Concrete Wedge Anchor Bolts 1 2 X 7 Includes Nuts Washers

15 Galvanized Concrete Wedge Anchor Bolts 1 2 X 7 Includes Nuts Washers. Finish: Galvanized. Lot of (15) wedge anchor bolts. These galvanized anchors are 1 / 2-13 thread and are 7", in length.

Simpson Strong Tie THDB62600HMG Titen HD Heavy Duty Screw Anchor Mechanically Galvanized 5 8 By 6 10 Per Box

Simpson Strong Tie THDB62600HMG Titen HD Heavy Duty Screw Anchor Mechanically Galvanized 5 8 By 6 10 Per Box
Simpson Strong Tie THDB62600HMG Titen HD Heavy Duty Screw Anchor Mechanically Galvanized 5 8 By 6 10 Per Box

Simpson Strong Tie THDB62600HMG Titen HD Heavy Duty Screw Anchor Mechanically Galvanized 5 8 By 6 10 Per Box. Serrated cutting teeth and patented Thread design enable quick and easy installation. Specialized heat-treating process creates greater hardness at the tip. Holes can be drilled with a rotary hammer. Anchors are installed with standard-size sockets. Simpson offers a wide variety of fasteners, accessories and tools under strong-drive structural fasteners, deck-drive Premium fasteners and quik-drive auto-feed screw driving systems. Every production run goes through rigorous testing to ensure all products can handle higher loads, resist corrosion and make installation more efficient. No special installation tools required. Simpson strong-tie stands apart from the rest in quality and reliability. High-load capacity as a result of the Full-Length threads.

CM M849G Super Strong Anchor Shackle With Galvanized Bolt Nut And Cotter 2 Ton Work Load Limit 7 16 Size

CM M849G Super Strong Anchor Shackle With Galvanized Bolt Nut And Cotter 2 Ton Work Load Limit 7 16 Size
CM M849G Super Strong Anchor Shackle With Galvanized Bolt Nut And Cotter 2 Ton Work Load Limit 7 16 Size

CM M849G Super Strong Anchor Shackle With Galvanized Bolt Nut And Cotter 2 Ton Work Load Limit 7 16 Size. Shackles meet dimensional requirements and exceed performance requirements of RR-C-271. Shackles show major deformation before failure. Anchor shackles can be side loaded or used for multiple connections. All shackles have alloy quenched and tempered pins. As a result, these shackles are designed with a 6: 1 design factor. Manufactured from technically advanced micro alloy steel with optimal hardness for strength and ductility. Working load limit and traceability codes shown as permanent markings on body. CM Super Strong Shackles are carbon-type shackles with strength ratings that are 17 to 50% stronger than comparable-sized carbon shackles.

Hard To Find Fastener 014973147334 Anchor Bolts 3 8 16 X 8 Piece 25

Hard To Find Fastener 014973147334 Anchor Bolts 3 8 16 X 8 Piece 25
Hard To Find Fastener 014973147334 Anchor Bolts 3 8 16 X 8 Piece 25

Hard To Find Fastener 014973147334 Anchor Bolts 3 8 16 X 8 Piece 25. Finish: Hot Dip Galvanized. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. Thread Type: 16 (Coarse). We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry.

Crosby 1019490 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 3 1 4 Ton Working Load Limit 5 8 Size

Crosby 1019490 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 3 1 4 Ton Working Load Limit 5 8 Size
Crosby 1019490 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 3 1 4 Ton Working Load Limit 5 8 Size

Crosby 1019490 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 3 1 4 Ton Working Load Limit 5 8 Size. forged-quenched tempered with alloy pins. Shackle finish is hot dip galvanized. Crosby's bolt type anchor shackles can be used in tie down, towing, suspension or lifting applications. hot dip galvanized. Shackles are forged quenched and tempered with alloy pins. The working load limit is 3-1 / 4 ton. can be used in tie down, towing, suspension or lifting applications. carbon anchor shackle. Crosby 1019515 Carbon Steel G-2130 Bolt Type Anchor Shackle, Galvanized, 4-3 / 4 Ton Working Load Limit, 3 / 4", Size.

Simpson Strong Tie THDB62800HMG 5 8 Inch By 8 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62800HMG 5 8 Inch By 8 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box
Simpson Strong Tie THDB62800HMG 5 8 Inch By 8 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box

Simpson Strong Tie THDB62800HMG 5 8 Inch By 8 Inch Mechanical Galvanized Titen HD Screw Anchor 10 Per Box. Higher load capacity and vibration resistance. Tested per AC 193 to ensure outstanding performance in both cracked and uncraked concrete. The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. Specialized heat treating process creates superior hardness at the tip to facilitate cutting. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. Mechanical Galvanized. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. The high strength, easy to install Titen HD anchor has been tested and shown to provice outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. Coilhose Pneumatics PRM 0404 Reusable Replacement Fitting For 1 / 4-Inch ID Hose, 1 / 4-Inch MPT Rigid. SDS-plus Bulldog Rotary Hammer Bit. x 12 In. Bosch HC 2104 5 / 8 In. The head is stamped with anchor length in inches.

Small Parts 45222 Anchor Bolt 3 4 10 X 12 Hot Dip Galvanized Pack Of 20

Small Parts 45222 Anchor Bolt 3 4 10 X 12 Hot Dip Galvanized Pack Of 20
Small Parts 45222 Anchor Bolt 3 4 10 X 12 Hot Dip Galvanized Pack Of 20

Small Parts 45222 Anchor Bolt 3 4 10 X 12 Hot Dip Galvanized Pack Of 20. Made with low carbon steel. Anchor bolts are embedded directly into concrete and used to anchor construction supports. An anchor bolt is a bent or L-shaped bolt with threads on the top portion of the bolt. The Threading at the top of the bolt allows light poles, steel columns or other structures to be fastened to them. Hot dip galvanized for superior, long-term corrosion resistance. The bottom bent portion or hook serves to create resistance so that the bolt does not pull out of the concrete foundation when force is applied. The threading at the top of the bolt allows structures to be fastened to them. These rods are slightly larger to accommodate the thicker coating. Bent anchor bolts (also called L-shaped anchor bolts) are embedded directly into concrete and used to anchor construction supports like structural steel columns, light poles, highway signs, heavy equipment, bridge rails, equipment and many other applications.

Powers Fastening Innovations 7751SD 1 2 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box

Powers Fastening Innovations 7751SD 1 2 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box
Powers Fastening Innovations 7751SD 1 2 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box

Powers Fastening Innovations 7751SD 1 2 Inch By 6 1 2 Inch Wedge Bolt And Blue Tip Large Diameter Screw Anchor Mechanically Galvanized 25 Per Box. Powers Fastening Innovations. Heavy duty screw anchor with a finished hex head. Easy to identify and fully removable. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits. Mechanically galvanized. Designed for consistent and reliable performance in cracked and untracked concrete. Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921.

CONFAST 5 8 X 5 Hot Dipped Galvanized Wedge Anchor Box Of 20

CONFAST 5 8 X 5 Hot Dipped Galvanized Wedge Anchor Box Of 20
CONFAST 5 8 X 5 Hot Dipped Galvanized Wedge Anchor Box Of 20

CONFAST 5 8 X 5 Hot Dipped Galvanized Wedge Anchor Box Of 20. Environment The anchor is designed for use in a Damp environment. HOT DIPPED GALVANIZED - Helps prevent rusting in moist environments. Torque Value To be set properly in the concrete, the anchor must be torqued to between 75 - 90 ft. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. WIDE RANGE OF SIZES - Insures proper fastener for best results. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Applications The anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. Hole Diameter / Bit Diameter The anchor requires a 5 / 8", hole to be drilled in the base material (Concrete only). Diameter of Anchor The diameter of the anchor is 5 / 8". Length Anchor The length of the anchor is 5", Thread Length The length of the threads on the anchor is 3", in length. Minimum Embedment The minimum anchor embedment into the concrete is 2-3 / 4". Therefore, the anchor must be installed so that a minimum of 2-3 / 4", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-5 / 8". This will ensure that the minimum embedment of 2-3 / 4", will be met. The 5 / 8", diameter anchor requires the hole in the fixture to be 7 / 8". Spacing between Anchors Each anchor must be spaced a minimum distance of 6-1 / 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3-1 / 8", from an unsupported edge of the concrete.

Hard To Find Fastener 014973147488 Anchor Bolts 5 8 11 X 14 Piece 10

Hard To Find Fastener 014973147488 Anchor Bolts 5 8 11 X 14 Piece 10
Hard To Find Fastener 014973147488 Anchor Bolts 5 8 11 X 14 Piece 10

Hard To Find Fastener 014973147488 Anchor Bolts 5 8 11 X 14 Piece 10. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. Finish: Hot Dip Galvanized. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Thread Type: 11 (Coarse). We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel.

Campbell 5392095 Galvanized Drop Forged Alloy Steel Bolt Type Anchor Shackle 1 1 4 Trade 18 Ton Working Load Limit

Campbell 5392095 Galvanized Drop Forged Alloy Steel Bolt Type Anchor Shackle 1 1 4 Trade 18 Ton Working Load Limit
Campbell 5392095 Galvanized Drop Forged Alloy Steel Bolt Type Anchor Shackle 1 1 4 Trade 18 Ton Working Load Limit

Campbell 5392095 Galvanized Drop Forged Alloy Steel Bolt Type Anchor Shackle 1 1 4 Trade 18 Ton Working Load Limit. Meet or exceed all manufacturing requirements of ASME B 30.26. Anchor shackles features innovative design changes in our forgings to meet growing industry needs. Drop forged for superior strength and performance. 5: 1 design factor. Galvanized to ASTM A-153 Meet or exceed all manufacturing requirements of ASME B 30.26. A-999-G shackles meet the design requirements of federal RR-C-271, Type IVA Grade B, Class Statistically tested for impact resistance, tensile strength, hardness, ductility and fatigue. Campbell's galvanized A-999-G alloy bolt type anchor shackles. Working load limit permanently shown on every shackle. Date code, WLL (working load limit), and Size are permanently forged on one side of shackle bow while Campbell, USA, and CE are permanently forged on the opposite side. Alloy shackles meet all requirements for CE compliance. Shackle bodies are drop-forged alloy steel. 1 / 4-inches length tolerance. 1 / 16-inches width tolerance. 1-3 / 8-inches pin size. 4-1 / 2-inches inner length. 3-1 / 4-inches inner width. 2-inches opening size. 3-inches eye outer size.

Crosby 1019471 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 1 1 2 Ton Working Load Limit 7 16 Size

Crosby 1019471 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 1 1 2 Ton Working Load Limit 7 16 Size
Crosby 1019471 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 1 1 2 Ton Working Load Limit 7 16 Size

Crosby 1019471 Carbon Steel G 2130 Bolt Type Anchor Shackle Galvanized 1 1 2 Ton Working Load Limit 7 16 Size. Shackle finish is hot dip galvanized. Shackles are forged quenched and tempered with alloy pins. carbon anchor shackle. hot dip galvanized. can be used in tie down, towing, suspension or lifting applications. forged-quenched tempered with alloy pins. The working load limit is 1-1 / 2 ton. Crosby's bolt type anchor shackles can be used in tie down, towing, suspension or lifting applications.