Best 19 Y Tube Fittings

24 Aug 2019

Vixen Horns 1 4 NPT Male Compression Fitting For 3 8 OD Tubes For Train Air Horn Tanks Bundle Of Four Fittings VXA7714 4

Vixen Horns 1 4 NPT Male Compression Fitting For 3 8 OD Tubes For Train Air Horn Tanks Bundle Of Four Fittings VXA7714 4
Vixen Horns 1 4 NPT Male Compression Fitting For 3 8 OD Tubes For Train Air Horn Tanks Bundle Of Four Fittings VXA7714 4

Vixen Horns 1 4 NPT Male Compression Fitting For 3 8 OD Tubes For Train Air Horn Tanks Bundle Of Four Fittings VXA7714 4. Durable Brass Material. Can be used with brass, copper, aluminum or steel tubing. Made of durable brass material that can support up to 350 PSI. Hose installation is done by taking out the compression nut, pushing the hose into the inlet and tighten the nut back to the fitting. Bundle of four fittings. Maximum pressure: 350 PSI. A high quality fitting manufactured to the highest standards required on high pressure pneumatic applications. Vixen Horns 1 / 4", OD Nylon Plastic Hose Up to 225 PSI 20 Feet for Train / Air Horn Systems and Other Suspension Applications VXA 7142. 1 / 4", OD x 50 SAE J 844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider. Viair 93940 40 Amp Air Compressor Relay for 12 Volt compressor. Astro AI Air Chuck, Heavy Duty Closed Flow Lock On Tire Chuck with Clip for Inflator Gauge Compressor Accessories, Yellow. Vixen Horns 1 / 2", NPT Male to 1 / 4", NPT Female Brass Thread Reducer Fitting for Train / Air Horn Tanks - Bundle of Two Fittings VXA 1214-2. Viair 90005 Tank Port Fittings Kit. Vixen Horns VXH 4124 B Loud 149 d B Four Trumpet Train Air Horn with 12 V Electric Solenoid Black. Vixen Air 3 / 8", OD Heavy Duty Nylon Hose Up to 435 PSI 25 Feet for Suspension Applications and Train / Air Horn Systems VXA 38025. Viair 90223 90 / 120 Pressure Switch with Leads. Utah Pneumatic 3 / 8", Od 10 Meter Tubing Nylon Air Hose Air Tubing Pipe Hose For Air Line Tubing Or Fluid Transfer Pneumatic Tubing (Nylon Tube 3 / 8). This straight compression fitting accepts 3 / 8", OD hose. The threaded end is 1", NPT Male. 1", NPT Compression Fitting (4 Pack) Thread: 1", NPT For 3 / 8", OD tubes Durable Brass Material. Thread: 1 inch NPT. For 3 / 8 inch OD tubes.

Horiznext Stainless Steel Compression Tube Fitting Union 3 8 Tube OD Straight Adapter

Horiznext Stainless Steel Compression Tube Fitting Union 3 8 Tube OD Straight Adapter
Horiznext Stainless Steel Compression Tube Fitting Union 3 8 Tube OD Straight Adapter

Horiznext Stainless Steel Compression Tube Fitting Union 3 8 Tube OD Straight Adapter. This fitting has hex nut construction for tighter, leak-free connections. This fitting is made of 304 stainless steel for higher strength and great corrosion resistance. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. Product: The Horiznext compression tube fitting is made of type 304 stainless steel and connects to tubing on both ends. Made of stainless steel 304, heavy duty, durable and corrosion resistance. WARRANTRY: Our products are usually covered by a 12-month warranty. It is compatible with stainless steel, copper, rigid and semi-rigid plastic tubing, but is not recommended for soft tubing. Maximum working pressure: 20000 psi Working Temperature: 212 to 1472 degrees? Temperature range from -212 to 1472 degrees? Maximum working pressure of 20000 psi. It is suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants. When purchasing fittings, we should consider the application, since this will affect material type, shape, size, and required durability. This union fitting is for connecting and disconnecting two pipes more easily than couplings. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic tubing. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson Metals 50062 Brass Compression Tube Fitting, Union, 3 / 8", x 3 / 8", Tube OD. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1 / 8-inch to 5 / 8-inch Tube Cutter. Home Brew Stuff Stainless Steel Tubing Coil - 3 / 8", x 50 - DIY Chiller, HERMS, or Moonshine Snake. Material: stainless steel 304 Size: 3 / 8", Length: 1.85 inches. Our products are excellently designed and proven reliable. 3 / 8", outer diameter tube.

Beduan Compression Tube Fitting Straight Adapter 304 Stainless Steel Connector Adapter 1 4 NPT X 3 8 Tube OD With Double Ferrules

Beduan Compression Tube Fitting Straight Adapter 304 Stainless Steel Connector Adapter 1 4 NPT X 3 8 Tube OD With Double Ferrules
Beduan Compression Tube Fitting Straight Adapter 304 Stainless Steel Connector Adapter 1 4 NPT X 3 8 Tube OD With Double Ferrules

Beduan Compression Tube Fitting Straight Adapter 304 Stainless Steel Connector Adapter 1 4 NPT X 3 8 Tube OD With Double Ferrules. Adapter for connecting pipes or fittings of different types. One side Fit connects to tubing and the other side has an NPT male connector. Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. High Qunatity: This fitting is made of chemically hardened type 305 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. 304 Stainless Steel Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Type: Compression Tube Fitting Material: 304 Stainless Steel Pipe and tube Fitting Reducer Union Connector are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Tube OD: 3 / 8", Male Dia: NPT 1 / 4; Ferrule Mini Inner Dia: 3 / 8", Body: 304 Stainless Steel.

Tailonz Pneumatic Male Straight 1 4 Tube OD X 1 8 NPT Thread Push To Connect Fittings PC 1 4 N1 Pack Of 10

Tailonz Pneumatic Male Straight 1 4 Tube OD X 1 8 NPT Thread Push To Connect Fittings PC 1 4 N1 Pack Of 10
Tailonz Pneumatic Male Straight 1 4 Tube OD X 1 8 NPT Thread Push To Connect Fittings PC 1 4 N1 Pack Of 10

Tailonz Pneumatic Male Straight 1 4 Tube OD X 1 8 NPT Thread Push To Connect Fittings PC 1 4 N1 Pack Of 10. Fluid Type: Air Only. We offer 1 / 4 nylon tube ASIN: B 07 P 56 RNXK? Proof Pressure: 3.0 Mpa 435 psi. Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. Please do not exceed the maximum use pressure when using. ASIN: B 07 P 56 RNXK? Please use straight cut tubing before inserting into the fitting. Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval. 1 / 4 od x 1 / 4 npt ASIN: B 07 PBPB 367. Failure to insert the pipe into the bottom may lead to air leakage. Working Pressure: 0-1.0 mpa 0-150 psi. Working Temperature: 0-60 C 32 140 Applicable Tube: PU / PA / PE / PVC. When inserting the pipe, it must be inserted into the bottom of the joint. Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. It is easy to insert or pull the trachea by hand without the aid of a tool. All thread are Teflon Coated. MATTERS NEED Please do not use it for purposes other than fluids. Body Style: Male Straight. Tailonz Pneumatic Push to Connect Air Fittings 1 / 4", Od 1 / 8", Npt Pneumatic Fittings Air Line Fittings Straight Union Fitting Pneumatic Connectors (Pack of 10). Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). Pneumatic Plus 1 / 4-Inch Tubing 100 Foot Roll for Air Compressor / Garden WOG Water Oil Gas. 1 / 4", od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters 2 Elbows 2 tee 2 Straight 8 pack (1 / 4", Combo). 10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 / 4", Tube OD x 1 / 4", NPT Thread. SNS SPU-1 / 4 1 / 4", Tube OD Plastic Straight Union Pipe Tube Fitting Straight Pneumatic Connector (10 PCS). Tailonz Pneumatic Air Line 1 / 4", Od Pneumatic Nylon Tube 32.8 ft Air Brake Tubing Nylon Air Hose for Air Brake System or Fluid Transfer (Nylon Tube 1 / 4"). Tailonz Pneumatic Male Elbow - 1 / 4", Tube OD x 1 / 4", NPT Thread, PL-1 / 4-N 2 Push to Connect Tube Fitting (Pack of 10). Tailonz Pneumatic Male Elbow - 1 / 4", Tube OD x 1 / 8", NPT Thread, PL-1 / 4-N 1 Push to Connect Tube Fitting (Pack of 10). 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread. 1 / 4", Tube OD x 1 / 8", NPT Thread.

John Guest Acetal Copolymer Tube Fitting Reducing Straight Union 1 2 X 3 8 Tube OD Pack Of 10

John Guest Acetal Copolymer Tube Fitting Reducing Straight Union 1 2 X 3 8 Tube OD Pack Of 10
John Guest Acetal Copolymer Tube Fitting Reducing Straight Union 1 2 X 3 8 Tube OD Pack Of 10

John Guest Acetal Copolymer Tube Fitting Reducing Straight Union 1 2 X 3 8 Tube OD Pack Of 10. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. Meets NSF / ANSI standards 14, 51, and 61 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. The company, founded in 1961, is headquartered in Great Britain and meets International Organization for Standardization (ISO) standard 9001. Reducing straight union for connecting and disconnecting two inline pipes of different diameters more easily than couplings. This reducing straight union fitting is for connecting and disconnecting two inline pipes of different diameters more easily than using couplings. Working pressure of up to 150 psi. This John Guest reducing straight union fitting is made of acetal copolymer and has tube connectors. John Guest manufactures push-to-connect fittings and pipe and plastic plumbing systems. Accepts nylon and polyurethane tube fittings. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. John Guest PISV 0416 S 1 / 2", x 1 / 2", Straight Ball Valve Speedfit to Speedfit Connector Grey Acetal Quick Connect RO DI Fitting Reverse Osmosis. John Guest Acetal Copolymer Tube Fitting, Union Straight Connector, 1 / 4", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Union Elbow, 1 / 4", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Union Tee, 1 / 4", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Union Elbow, 3 / 8", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Imperial Single Check Valve, 3 / 8", Tube OD. John Guest Acetal Copolymer Tube Fitting, Union Straight Connector, 1 / 2", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 1 / 2", Tube OD x 1 / 2", NPTF Male (Pack of 10). Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6 MPa 0-220 psi Reverse Osmosis System Pump With 1 / 4. John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 3 / 8", Tube OD x 1 / 2", NPTF Male (Pack of 10). The working pressure for this fitting is up to 150 pounds per square inch (psi), and it meets National Sanitation Foundation (NSF) American National Standards Institute (ANSI) standards 14, 51, and 61 for plastic piping systems, food equipment materials, and use with drinking (potable) water.

Bulkhead Union Push To Connect Tube Fitting 3 8 Tube OD X 3 8 Tube OD 5 Packs Stainless Steel Double Threaded

Bulkhead Union Push To Connect Tube Fitting 3 8 Tube OD X 3 8 Tube OD 5 Packs Stainless Steel Double Threaded
Bulkhead Union Push To Connect Tube Fitting 3 8 Tube OD X 3 8 Tube OD 5 Packs Stainless Steel Double Threaded

Bulkhead Union Push To Connect Tube Fitting 3 8 Tube OD X 3 8 Tube OD 5 Packs Stainless Steel Double Threaded. Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property. Each model to serve its purpose. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. Working Temperature: 0-60! Fluid Admitted: Air, Vacuum, Water (No Freezing), Working Pressure: 0-1.0 mpa 150 psi; Proof Pressure: 3.0 Mpa 435 psi; Negative Pressure-100 Kpa -29.5 In Hg. Narrow space is also suitable with the push. Bulkhead Fitting Type: Push In Straight Male Connector; Body: Nickel Plated Brass Seal, O-Ring NBR. DERNORD bulkhead union fitting allows tube connection on either side of barrier and can easily change the tubing connector direction. Bulkhead union fitting connector is available in various styles and models. a Applicable Tube: PU / PA / PE / PVC. bulkhead union fitting is widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical. Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly. Vixen Air Push to Connect (PTC) Union / Joint Tee / 3-way Pneumatic Fitting for 3 / 8", OD Hoses - Bundle of Two Fittings VXA 8338-2. Utah Pneumatic Push to Connect Tube Fitting, Bulkhead Union 1 / 4", Tube OD X 1 / 4", Tube OD (5 Pack). Plastic Push to Connect Push Fittings Tube Elbow 3 / 8", od Push fit Pneumatic Fitting 10 Pack. Pneumatic Plus BUC Series Push To Connect Straight Union Ball Valve (1 / 4", OD X 1 / 4", OD Tube). 1 / 4", OD x 50 SAE J 844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider. Pneumatic Plus PN 15 Series Push to Connect Tube Fitting, Male Elbow (3 / 8", Tube X 3 / 8", NPT)- Pack of 5. Utah Pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1 / 4 inch od y spliter Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch y spliter). Vixen Air Push to Connect (PTC) Union / Joint Elbow Pneumatic Fitting for 3 / 8", OD Hoses - Bundle of Two Fittings VXA 8138-2. Vixen Air 1 / 2", NPT Male Push to Connect (PTC) Straight Pneumatic Fitting for 3 / 8", OD Hose - Bundle of Four Fittings VXA 7123-4. Utah Pneumatic 3 / 8", Od 10 Meter Tubing Nylon Air Hose Air Tubing Pipe Hose For Air Line Tubing Or Fluid Transfer Pneumatic Tubing (Nylon Tube 3 / 8). Bulkhead Fitting Push Connector Type: 3 / 8 inch, Tube OD 3 / 8 inch NPT.

Wanm Pneumatic Push To Connect Tube Fittings Male Elbow 1 2 Tube OD X 1 2 NPT Thread 10 Per Pack

Wanm Pneumatic Push To Connect Tube Fittings Male Elbow 1 2 Tube OD X 1 2 NPT Thread 10 Per Pack
Wanm Pneumatic Push To Connect Tube Fittings Male Elbow 1 2 Tube OD X 1 2 NPT Thread 10 Per Pack

Wanm Pneumatic Push To Connect Tube Fittings Male Elbow 1 2 Tube OD X 1 2 NPT Thread 10 Per Pack. Narrow space is also suitable with the push. Applicable Tube: Polyurethane and Nylon. Wanm Pneumatic Push to Connect Tube Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected with wrench easily. Fluid Type: Air Only. You can easily change the tubing connector direction. Body Style: Male Elbow. Push to Connect Fittings are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical. Utah Pneumatic Air line 1 / 4", Od 10 Meters SAEJ 844 Air Brake Tubing Nylon Air Hose for Air Brake System Or Fluid Transfer (Nylon Tube 1 / 4"). Tailonz Pneumatic Male Elbow - 1 / 4", Tube OD x 1 / 4", NPT Thread, PL-1 / 4-N 2 Push to Connect Tube Fitting (Pack of 10). 1 / 2", Tube OD x 1 / 2", NPT Thread.

KOTL Teflon Tube 3Pcs PTFE Teflon Tube 1 5 Meters With 3Pcs PC4 M6 Fittings And 3Pcs PC4 M10 Fittings For 3D Printer 1 75Mm Filament 2 0Mm ID 4 0Mm OD

KOTL Teflon Tube 3Pcs PTFE Teflon Tube 1 5 Meters With 3Pcs PC4 M6 Fittings And 3Pcs PC4 M10 Fittings For 3D Printer 1 75Mm Filament 2 0Mm ID 4 0Mm OD
KOTL Teflon Tube 3Pcs PTFE Teflon Tube 1 5 Meters With 3Pcs PC4 M6 Fittings And 3Pcs PC4 M10 Fittings For 3D Printer 1 75Mm Filament 2 0Mm ID 4 0Mm OD

KOTL Teflon Tube 3Pcs PTFE Teflon Tube 1 5 Meters With 3Pcs PC4 M6 Fittings And 3Pcs PC4 M10 Fittings For 3D Printer 1 75Mm Filament 2 0Mm ID 4 0Mm OD. Compatibility: Compatible with all 1.75 mm PLA ABS 3 D printer, works with Anet A 8. Easy to Install: These 3 D printer accessories are able to bear stronger impulse but won't tripping, easy to use. freely, easy to disassemble. 3 2 M PTFE Teflon Bowden Tube (2.0 mm ID / 4.0 mm OD) 3 PC 4-M 6 Fittings for 4 mm OD Tube 3 PC 4-M 10 fittings for 4 mm OD Tube You are to it for a full if not happy with the which make your absolutely risk-free and you can enjoy testing out it's quality and durability Warranty 30 Days Money Back. PC 4-M 10 Fittings Inner diameter (black end), 4 mm Thread: M 10 / 6 mm Material: stainless steel and plastic Color: black silver Widely applied for connecting extruders, PTFE fittings. 20 PCS 3 D Printer Nozzle 0.4 mm MK 8 Extruder Head for Creality Cr 10. Upgrade 3 D Printer Parts MK 8 Extruder Aluminum Alloy Block Bowden Extruder 1.75 mm Filament for Creality 3 D Ender 3, CR-7, CR-8, CR-10, CR-10 S, CR-10 S 4, and CR-10 S 5. Aokin 22 Pieces 3 D Printer Nozzles, MK 8 Extruder Nozzle 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Brass Extruder Print Head for 3 D Printer Anet A 8 Makerbot MK 8 Creality CR-10 Ender 3. HATCHBOX PLA 3 D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Black. Marketty 3 D Printer Die Spring 8 mm OD 20 mm Long Light Load Compression Mould Die Spring Yellow 10 pcs, Actually Work Perfectly for The Ender 3 s Bed. Creality 3 D Printer Extruder Nozzle 10 PCS 0.4 mm MK 8 for Makerbot Anet A 8 Creality CR-10 CR-10 S S 4 S 5 Ender-3. 8 mm OD 20 mm Long Light Load Compression Mould Die Spring Yellow Compression Mould Die Spring for The Ender 3 s Bed 20 pcs. LANMU Micro SD to SD Card Extension Cable Adapter Flexible Extender SD / RS-MMC / SDHC / MMC for Monoprice Select Mini 3 D Printer / Anet A 8 3 D Printer / Raspberry Pi / GPS / TV. Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75 mm Filament (Genuine Capricorn Premium Tubing). uxcell 8 mm OD 20 mm Long Light Load Compression Mould Die Spring Yellow 10 pcs. of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene), Density: 2.15-2.20 g / cm 3 Heat resistance: up to 260? Outside Diameter: 4 mm Inside Diameter: 2 mm Color: Blue Length: 1.5 m PC 4-M 6 Fittings Inner diameter (blue end), 4 mm Thread diameter: 6 mm Material: copper and plastic Color: golden blue It supports turn 360? Premium Material: The Teflon Tube is made of durable PTFE (Poly Tetra Fluoro Ethylene), with non toxic and wear resisting, PC 4-M 6 Fittings is made of Copper, PC 4-M 10 Fittings is made of stainless steel. Performance: The density is 2.15-2.20 g / cm 3 and the heat resistance is so nice so that it's temperatures can up to 260?

HONJIE Push To Connect Air Fittings 5 32 Inch Odplastic Push To Connect Fittings Tube Connect Y Splitter Push Fit Fittings Tube Fittings Push Lock 10 Pcs Pack

HONJIE Push To Connect Air Fittings 5 32 Inch Odplastic Push To Connect Fittings Tube Connect Y Splitter Push Fit Fittings Tube Fittings Push Lock 10 Pcs Pack
HONJIE Push To Connect Air Fittings 5 32 Inch Odplastic Push To Connect Fittings Tube Connect Y Splitter Push Fit Fittings Tube Fittings Push Lock 10 Pcs Pack

HONJIE Push To Connect Air Fittings 5 32 Inch Odplastic Push To Connect Fittings Tube Connect Y Splitter Push Fit Fittings Tube Fittings Push Lock 10 Pcs Pack. You can easily change the tubing connector direction. Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel. Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently. Quick Connect Fittings are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical. Quick connect fittings negative pressure: 29.5 in Hg/-750 mm Hg; working temperature: 32-160? Narrow space is also suitable with the push. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly. Features: Push to connect air fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily. application of air tube: polyurethane and nylon tube. This tube connector is available in various styles and models, each model to serve its purpose. Push to connect air fittings size: 5 / 32 inch to 5 / 32 inch; material: plastic. Push fitting working medium: compressed air, vacuum (not other liquid), working pressure: 0-150 PSI / 0-9.9 kgf / cm 2 (0-990 kpa).

10 Pack Push To Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 4 Tube OD X 1 4 NPT Thread

10 Pack Push To Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 4 Tube OD X 1 4 NPT Thread
10 Pack Push To Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 4 Tube OD X 1 4 NPT Thread

10 Pack Push To Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 4 Tube OD X 1 4 NPT Thread. Applicable Tube: PU / PA / PE / PVC. Made of quality plastic and stainless steel for durable use. Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property. Narrow space is also suitable with the push Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected Widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical 10 X Quick Connect Fitting Connectors. You can easily change the tubing connector direction. 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread. SNS Pneumatic Od 1 / 4", 10 Meters PU Pneumatic Air Tubing Pipe Hose for Air line or Fluid Transfer. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1 / 4 inch Straight od Push Fit Fittings Tube Fittings Push Lock (1 / 4", Straight). Tailonz Pneumatic Air Line 1 / 4", Od Pneumatic Nylon Tube 32.8 ft Air Brake Tubing Nylon Air Hose for Air Brake System or Fluid Transfer (Nylon Tube 1 / 4"). 45 Pcs Straight Connectors Puch to Connect Fittings Air Line Fittings Air Quick Connect Fittings for 1 / 4, 5 / 16, 3 / 8 Tube. 1 / 4", od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters 2 Elbows 2 tee 2 Straight 8 pack (1 / 4", Combo). Tailonz Pneumatic Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread Push to Connect Fittings PC-1 / 4-N 1 (Pack of 10). 4 H 210-085 Way Pneumatic Air Hand Lever Operated Valve Solenoid Valve Port 1 / 4", Manual Control Valves. Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 4", NPT Thread. Type: Quick Connect Fitting Connector; 1 / 4", Tube OD x 1 / 4", NPT. Fluid Type: air, vacuum; Operating Pressure: 0- 150 PSI / 0-9.9 kgf / cm 2 (0-990 k Pa), Working Temperature: 0-60 C 32 140 F; Negative Pressure: 100 Kpa -29.5 In H.

Beduan BUC Pneumatic Plastic Straight Union Ball Valve 1 4 OD X 1 4 OD Tube Push To Connect Fitting Air Flow Control Valve

Beduan BUC Pneumatic Plastic Straight Union Ball Valve 1 4 OD X 1 4 OD Tube Push To Connect Fitting Air Flow Control Valve
Beduan BUC Pneumatic Plastic Straight Union Ball Valve 1 4 OD X 1 4 OD Tube Push To Connect Fitting Air Flow Control Valve

Beduan BUC Pneumatic Plastic Straight Union Ball Valve 1 4 OD X 1 4 OD Tube Push To Connect Fitting Air Flow Control Valve. The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion. Pressure: 284 PSI). Beduan Pneumatic composite should not be used for live swivel applications. All items in the Beduan Pneumatic composite range are silicone free. Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting. Available for water, air and PPS resin body. Applicable for water (Max Pressure: 50 PSI) and air (Max. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity. The bode are Made from the Resin (PBT). The Stainless steel gripping ring ensures excellent tube retention while the D sealwithin the fitting provides a positive seal on the D. Composite Fitting Push to Connect Tube to Tube 1 / 4", OD X 1 / 4", OD.

John Guest Acetal Copolymer Tube Fitting Union Straight Connector 3 8 Tube OD Pack Of 10

John Guest Acetal Copolymer Tube Fitting Union Straight Connector 3 8 Tube OD Pack Of 10
John Guest Acetal Copolymer Tube Fitting Union Straight Connector 3 8 Tube OD Pack Of 10

John Guest Acetal Copolymer Tube Fitting Union Straight Connector 3 8 Tube OD Pack Of 10. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a torch, is prohibited. Union straight connector for connecting and disconnecting two inline pipes more easily than couplings. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. This John Guest union straight connector fitting is made of acetal copolymer and has tube connectors. It is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. Accepts nylon and polyurethane tube fittings. Working pressure of up to 150 psi. Meets NSF / ANSI standards 14, 51, and 61 for quality assurance. This fitting meets National Sanitation Foundation (NSF) American National Standards Institute (ANSI) standards 14, 51, and 61 for plastic piping systems, food equipment materials, and use with drinking (potable) water. This union straight connector fitting is for connecting and disconnecting two inline pipes more easily than using couplings. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The company, founded in 1961, is headquartered in Great Britain and meets International Organization for Standardization (ISO) standard 9001. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. John Guest manufactures push-to-connect fittings and pipe and plastic plumbing systems. John Guest Speedfit PE-12-EI-025 F-B LLDPE Tubing 25 Feet, 3 / 8", OD, Blue. John Guest Speedfit PPSV 041212 WP John Guest 3 / 8", Push-Fit Shut Valve, White. John Guest Acetal Copolymer Tube Fitting, Union Tee, 3 / 8", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Union Elbow, 1 / 4", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Union Elbow, 3 / 8", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 3 / 8", Tube OD x 1 / 2", NPTF Male (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Reducing Straight Union, 3 / 8", x 1 / 4", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Reducing Straight Union, 1 / 2", x 3 / 8", Tube OD (Pack of 10). John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 3 / 8", Tube OD x 1 / 4", NPTF Male (Pack of 10). John Guest Push-to-connect union tees, polypropylene, 3 / 8", 10 / pack. The working pressure for this fitting is up to 150 pounds per square inch (psi).

Tailonz Pneumatic Male Straight 3 8 Tube OD X 1 4 NPT Thread Push To Connect Fittings PC 3 8 N2 Pack Of 10

Tailonz Pneumatic Male Straight 3 8 Tube OD X 1 4 NPT Thread Push To Connect Fittings PC 3 8 N2 Pack Of 10
Tailonz Pneumatic Male Straight 3 8 Tube OD X 1 4 NPT Thread Push To Connect Fittings PC 3 8 N2 Pack Of 10

Tailonz Pneumatic Male Straight 3 8 Tube OD X 1 4 NPT Thread Push To Connect Fittings PC 3 8 N2 Pack Of 10. Working Pressure: 0-1.0 mpa 0-150 psi. Fluid Type: Air Only. Body Style: Male Straight. Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. It is easy to insert or pull the trachea by hand without the aid of a tool. All thread are Teflon Coated. When inserting the pipe, it must be inserted into the bottom of the joint. Proof Pressure: 3.0 Mpa 435 psi. Please use straight cut tubing before inserting into the fitting. After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval. Also available in the following size (please see corresponding ASIN), 3 / 8 od Tube: B 07 P 1 TDMRQ elbow 3 / 8 od? 1 / 4 NPT ASIN: B 07 R 87 H 7 S 8. Working Temperature: 0-60 C 32 140 Applicable Tube: PU / PA / PE / PVC. Failure to insert the pipe into the bottom may lead to air leakage. Please do not exceed the maximum use pressure when using. MATTERS NEED Please do not use it for purposes other than fluids. Tailonz Pneumatic Male Elbow - 1 / 4", Tube OD x 1 / 4", NPT Thread, PL-1 / 4-N 2 Push to Connect Tube Fitting (Pack of 10). 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread. 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 4", NPT Thread. Utah Pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect y spliter 3 / 8 od Push Fit Fittings Tube Fittings Push Lock 2 Way Divider (y spliter 3 / 8). Tailonz Pneumatic Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread Push to Connect Fittings PC-1 / 4-N 1 (Pack of 10). Pneumatic Plus PN 15 Series Push to Connect Tube Fitting, Male Elbow (3 / 8", Tube X 1 / 4", NPT) Pack of 5. Vixen Horns VXA 7150 120-150 PSI Air Pressure Switch Tank Mount Type 1 / 4", NPT 12 V / 24 V for Train / Air Horn. Pow Ryte Elite Solid Brass Fiting, Female Coupling Set - 1 / 4-Inch NPT x 1 / 4-Inch NPT, 5-Pack. Utah Pneumatic 3 / 8", Od 10 Meter Tubing Nylon Air Hose Air Tubing Pipe Hose For Air Line Tubing Or Fluid Transfer Pneumatic Tubing (Nylon Tube 3 / 8). Tailonz Pneumatic PL-3 / 8-N 2 Push to Connect Tube Fitting, Male Elbow - 3 / 8", Tube OD x 1 / 4", NPT Thread (Pack of 10). 3 / 8", Tube OD x 1 / 4", NPT Thread.

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 8 NPT Thread PL 1 4 N1 Push To Connect Tube Fitting Pack Of 10

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 8 NPT Thread PL 1 4 N1 Push To Connect Tube Fitting Pack Of 10
Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 8 NPT Thread PL 1 4 N1 Push To Connect Tube Fitting Pack Of 10

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 8 NPT Thread PL 1 4 N1 Push To Connect Tube Fitting Pack Of 10. Fluid Type: Air Only. Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. When inserting the pipe, it must be inserted into the bottom of the joint. After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 1 / 4 od x 1 / 4 npt ASIN: B 07 P 7 BFZ 6 T. Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval. Body Style: Male Elbow. Working Pressure: 0-1.0 mpa 0-150 psi. All thread are Teflon Coated. ASIN: B 07 P 56 RNXK? It is easy to insert or pull the trachea by hand without the aid of a tool. Working Temperature: 0-60 C 32 140 Applicable Tube: PU / PA / PE / PVC. Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. Please do not exceed the maximum use pressure when using. Failure to insert the pipe into the bottom may lead to air leakage. Please use straight cut tubing before inserting into the fitting. MATTERS NEED Please do not use it for purposes other than fluids. Proof Pressure: 3.0 Mpa 435 psi. Pneumatic Plus 1 / 4-Inch Tubing 100 Foot Roll for Air Compressor / Garden WOG Water Oil Gas. Pneumatic Plus PC-1 / 4-N 2 Push to Connect Tube Fitting, Male Straight - 1 / 4", Tube OD x 1 / 4", NPT Thread (Pack of 10). SNS SPV-1 / 4 1 / 4", Tube OD Union Elbow Plastic Push to Quick Connect Tube Fitting (10 PCS). 10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 / 4", Tube OD x 1 / 4", NPT Thread. Tailonz Pneumatic Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread Push to Connect Fittings PC-1 / 4-N 1 (Pack of 10). Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). Utah Pneumatic Air line 1 / 4", Od 10 Meters SAEJ 844 Air Brake Tubing Nylon Air Hose for Air Brake System Or Fluid Transfer (Nylon Tube 1 / 4"). 1 / 4", Tube OD x 1 / 8", NPT Thread.

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 4 NPT Thread PL 1 4 N2 Push To Connect Tube Fitting Pack Of 10

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 4 NPT Thread PL 1 4 N2 Push To Connect Tube Fitting Pack Of 10
Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 4 NPT Thread PL 1 4 N2 Push To Connect Tube Fitting Pack Of 10

Tailonz Pneumatic Male Elbow 1 4 Tube OD X 1 4 NPT Thread PL 1 4 N2 Push To Connect Tube Fitting Pack Of 10. Body Style: Male Elbow. It is easy to insert or pull the trachea by hand without the aid of a tool. When inserting the pipe, it must be inserted into the bottom of the joint. Working Temperature: 0-60 C 32 140 Applicable Tube: PU / PA / PE / PVC. After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. Proof Pressure: 3.0 Mpa 435 psi. Please use straight cut tubing before inserting into the fitting. Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage. 1 / 4 od x 1 / 8 npt ASIN: B 07 P 7 BFZ 6 T. Please do not exceed the maximum use pressure when using. Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage. Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval. Fluid Type: Air Only. MATTERS NEED Please do not use it for purposes other than fluids. Failure to insert the pipe into the bottom may lead to air leakage. ASIN: B 07 P 56 RNXK? Working Pressure: 0-1.0 mpa 0-150 psi. All thread are Teflon Coated. Tailonz Pneumatic Push to Connect Air Fittings 1 / 4", Od 1 / 8", Npt Pneumatic Fittings Air Line Fittings Straight Union Fitting Pneumatic Connectors (Pack of 10). Tailonz Pneumatic Straight - 1 / 4 Tube OD Push to Connect Tube Fittings Push Lock (Pack of 10). SNS SPU-1 / 4 1 / 4", Tube OD Plastic Straight Union Pipe Tube Fitting Straight Pneumatic Connector (10 PCS). Tailonz Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1 / 4 inch Straight od Push Fit Fittings Tube Fittings Push Lock (1 / 4", Straight). Tailonz Pneumatic Air Line 1 / 4", Od Pneumatic Nylon Tube 32.8 ft Air Brake Tubing Nylon Air Hose for Air Brake System or Fluid Transfer (Nylon Tube 1 / 4"). Tailonz Pneumatic Male Straight 3 / 8", Tube OD x 1 / 4", NPT Thread Push to Connect Fittings PC-3 / 8-N 2 (Pack of 10). Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). PL-04-02 (5 Pack) 1 / 4", Tube OD x 1 / 8", NPT Thread Male Elbow Push to Connect Pneumatic Tube Fitting Composite. Tailonz Pneumatic Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread Push to Connect Fittings PC-1 / 4-N 1 (Pack of 10). 1 / 4", Tube OD x 1 / 4", NPT Thread.

Spears 1435 Series PVC Tube Fitting Adapter Schedule 40 Gray 2 Barbed X NPT Female

Spears 1435 Series PVC Tube Fitting Adapter Schedule 40 Gray 2 Barbed X NPT Female
Spears 1435 Series PVC Tube Fitting Adapter Schedule 40 Gray 2 Barbed X NPT Female

Spears 1435 Series PVC Tube Fitting Adapter Schedule 40 Gray 2 Barbed X NPT Female. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001. Adapter for connecting pipes or fittings of different types. Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other. This adapter has a barbed fitting on one end to create a tight seal on flexible PE pipe when used with a hose clamp separately), and a female NPT connector on the other end connects to threaded pipe. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. PVC is corrosion resistant, and has high strength. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. It resists reactions with acids, gasoline, alcohol, and hydrocarbons. Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water. It is certified by NSF International for use with potable water. The fitting meets D 2609 standards set by ASTM International for plastic insert fittings for use with PE pipe, as well as ASTM schedule 40 standards for wall thickness to support working pressure to 140 psi. Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. Spears 1406 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 2", Barbed. Spears 1436 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 1-1 / 2", Barbed x NPT Male. Dixon G 200-C-AL Aluminum A 380 Global Type C Cam and Groove Hose Fitting, 2", Socket x 2", Hose ID Barbed. Dixon Valve TM 26 Nylon Tuff-Lite Shank / Water Fitting, Mender, 2", Hose ID. Spears 1436 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2", Barbed x NPT Male. Banjo NIP 200-SH Polypropylene Pipe Fitting, Short Nipple, Schedule 80, 2", NPT Male, 2-1 / 2", Length. Spears 1407 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 2", Barbed x NPT Female. Lifegard Aquatics 2-Inch Standard Threaded Bulkhead. Maxx Flex 2", Dia x 25 ft Hydro Maxx Non Kink Flexible PVC Water Garden Hose and Pond Tubing (US - UL Size). The Spears 1435 series tube fitting is made of gray polyvinyl chloride (PVC) plastic and connects schedule 40 polyethelene (PE) pipe to threaded pipe conforming to the National Pipe Thread (NPT) standard.

10 Pack Push To Connect Tube Fitting Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings Male Straight 1 4 Tube OD X 1 4 NPT Thread

10 Pack Push To Connect Tube Fitting Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings Male Straight 1 4 Tube OD X 1 4 NPT Thread
10 Pack Push To Connect Tube Fitting Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings Male Straight 1 4 Tube OD X 1 4 NPT Thread

10 Pack Push To Connect Tube Fitting Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings Male Straight 1 4 Tube OD X 1 4 NPT Thread. Applicable Tube: PU / PA / PE / PVC. Easy to install and removed, offering good seal property. Made of quality plastic and stainless steel for durable use. Push Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected Widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical 10 X Push to Connect Tube Fitting. Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). 45 Pcs Straight Connectors Puch to Connect Fittings Air Line Fittings Air Quick Connect Fittings for 1 / 4, 5 / 16, 3 / 8 Tube. Pneumatic Plus 1 / 4-Inch Tubing 100 Foot Roll for Air Compressor / Garden WOG Water Oil Gas. 10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1 / 4", Tube OD x 1 / 4", NPT Thread. Tailonz Pneumatic Male Straight 3 / 8", Tube OD x 1 / 4", NPT Thread Push to Connect Fittings PC-3 / 8-N 2 (Pack of 10). Tailonz Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1 / 4 inch od Push Fit Fittings Tube Fittings Push Lock (1 / 4 inch tee). SNS Pneumatic Od 1 / 4", 10 Meters PU Pneumatic Air Tubing Pipe Hose for Air line or Fluid Transfer. Tailonz Pneumatic Air Line 1 / 4", Od Pneumatic Nylon Tube 32.8 ft Air Brake Tubing Nylon Air Hose for Air Brake System or Fluid Transfer (Nylon Tube 1 / 4"). 1 / 4", od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters 2 Elbows 2 tee 2 Straight 8 pack (1 / 4", Combo). Tailonz Pneumatic Male Straight 1 / 4", Tube OD x 1 / 8", NPT Thread Push to Connect Fittings PC-1 / 4-N 1 (Pack of 10). Type: Male Straight, Size: 1 / 4", Tube OD x 1 / 4", NPT Thread. Fluid Type: air, vacuum; Operating Pressure: 0- 150 PSI / 0-9.9 kgf / cm 2 (0-990 k Pa), Working Temperature: 0-60 C 32 140 F; Negative Pressure: 100 Kpa -29.5 In H.

Ewigkeit Teflon Tube PTFE Blue Tubing With PC4 M6 Pneumatic Fittings And PC4 M10 Straight Push Fitting Connector For 3D Printer 1 75Mm Filament Pack Of 9Cs

Ewigkeit Teflon Tube PTFE Blue Tubing With PC4 M6 Pneumatic Fittings And PC4 M10 Straight Push Fitting Connector For 3D Printer 1 75Mm Filament Pack Of 9Cs
Ewigkeit Teflon Tube PTFE Blue Tubing With PC4 M6 Pneumatic Fittings And PC4 M10 Straight Push Fitting Connector For 3D Printer 1 75Mm Filament Pack Of 9Cs

Ewigkeit Teflon Tube PTFE Blue Tubing With PC4 M6 Pneumatic Fittings And PC4 M10 Straight Push Fitting Connector For 3D Printer 1 75Mm Filament Pack Of 9Cs. Connecting by the outer thread of fitting, easy to install, Pressing and holding black or blue oval of quick fitting to release conveniently. Warm Notice: These 3 D printer parts are very small, please keep them away from children. PC 4-M 6 bowden fitting is made of premium copper and plastic, Inner diameter (blue end) is 4 mm. PC 4-M 10 pneumatic fittings is made of stainless steel and plastic, Inner diameter (black end) is 4 mm. ARQQ TL Smoother Addon Module for Pattern Elimination Motor Clipping Filter 3 D Printer Stepper Motor Drivers (Pack of 3 pcs). HATCHBOX PLA 3 D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Black. uxcell 8 mm OD 20 mm Long Light Load Compression Mould Die Spring Yellow 10 pcs. 24 PCS 3 D Printer Nozzles MK 8 Extruder Nozzles 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm with a Storage Box for Makerbot Creality CR 10 Ender 3 5. Creality 3 D Printer Extruder Nozzle 10 PCS 0.4 mm MK 8 for Makerbot Anet A 8 Creality CR-10 CR-10 S S 4 S 5 Ender-3. PTFE Teflon tube cutter, cut up to 3 / 4", OD tube- Allen tech. Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75 mm Filament (Genuine Capricorn Premium Tubing). LANMU Micro SD to SD Card Extension Cable Adapter Flexible Extender SD / RS-MMC / SDHC / MMC for Monoprice Select Mini 3 D Printer / Anet A 8 3 D Printer / Raspberry Pi / GPS / TV. Marketty 3 D Printer Die Spring 8 mm OD 20 mm Long Light Load Compression Mould Die Spring Yellow 10 pcs, Actually Work Perfectly for The Ender 3 s Bed. FYSETC 3 D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10 S S 4 Ender 3 Heatbed Springs Bottom Connect Leveling - 10 Pack. of Teflon tube Material: PTFE (Poly Tetra Fluoro Ethylene) Outside Diameter: 4 mm Inside Diameter: 2 mm Density: 2.15-2.20 g / cm 3 Color: Blue Length: 1.5 m Heat resistance: 190? Four Feature: Excellent Corrosion Resistance, Extremely Insulation Resistance, Geat Temperature Resistance, Acid and alkali of PC 4-M 6 Fittings Inner diameter (blue end), 4 mm Material: copper and plastic Color: of PC 4-M 10 Fittings Inner diameter (black end), 4 mm Material: stainless steel and plastic Color: black silver Widely applied for connecting extruders, PTFE fittings Compatibility: Compatible with all 1.75 mm PLA ABS 3 D printer, works with Anet A 8 Installation: connecting by the outer thread of the quick fitting Disassemble: press and hold the blue or black end of the quick fitting and pull out the including 3 x 1.5 M PTFE tube (2.0 mm ID / 4.0 mm OD) 4 x PC 4-M 6 fittings 4 x PC 4-M 10 fittings. the blue bowden tube outside diameter 4 mm, inside diameter 2 mm, density 2.15-2.20 g / cm 3.

Sydien 5 Pcs 6Mm Tube To M5 Male Thread Push In To Connect Fittings Pneumatic Flow Speed Control Air Flow Control Valve

Sydien 5 Pcs 6Mm Tube To M5 Male Thread Push In To Connect Fittings Pneumatic Flow Speed Control Air Flow Control Valve
Sydien 5 Pcs 6Mm Tube To M5 Male Thread Push In To Connect Fittings Pneumatic Flow Speed Control Air Flow Control Valve

Sydien 5 Pcs 6Mm Tube To M5 Male Thread Push In To Connect Fittings Pneumatic Flow Speed Control Air Flow Control Valve. Yet the special adjustment needle design provides a high precision air flow adjustment. Push in fittings, flow speed controller, used in pneumatic piping's Series pneumatic inline air flow speed control valve. The Speed Controller is designed to control the rate of the flow, suit for Polyurethane or Nylon tubing. Offers a secure connections that hold the tube firmly without restricting flow. 1 / 4", PT Male Thread 6 mm Straight Pneumatic Push in Quick Fitting Connectors for PETF Tube 10 Pcs. 100 PCS 21", Disposable Bouffant (Hair Net) Caps, Spun-Bounded Poly, Hair Head Cover Net, Non-Woven, Medical, Labs, Nurse, Tattoo, Food Service, Health, Hospital. Sydien 5 Pcs 4 mm to M 5 Male Thread Air Flow Control Valve with Push-to-Connect Fitting, Pneumatic Speed Control Valve. ZXHAO One touch hose Connector 6 mm / 0.24 inch Thread M 5 Pneumatic Air Straight Fitting (PC 6-M 5) 10 pcs. URBEST 6 mm x 4 mm 12 Meter 39.4 ft Pneumatic Air PU Hose Pipe Tube Black for Push Type Quick Fittings. Sydien 16 mm Bore 50 mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 2 Pcs Pneumatic Quick Fittings (MAL 16 x 50). Uxcell a 14042800 ux 1306 2 Pcs 1 / 8 PT Thread Sintered Pneumatic Exhaust Silencer Muffler Fitting (Pack of 2). 10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1 / 4", Tube OD x 1 / 4", NPT Thread. Yootop 5 Pcs 8 mm Push in Pneumatic Speed Controller Air Flow Control Valve Air Tube Adjuster Quick Connect Fitting 1 / 8 BSP Thread. Sutemribor 304 Stainless Steel Flat Washers Set 580 pcs, 9 Sizes - M 2 M 2.5 M 3 M 4 M 5 M 6 M 8 M 10 M 12. Product Name: Speed Control Fitting; Thread Diameter: M 5; Inner Diameter (Blue End), 6 mm / 0.24", Material: Plastic, Metal; Overall Size (Approx.), 28 x 25 x 13.5 mm (L W T), Main Color: Black, Blue, Silver Tone Content: 5 Pcs speed Control Fitting. Inner Dia (Blue End), 6 mm / 0.24", Thread Diameter: M 5.