Top 20 Best Function Generator Modules

15 Apr 2019

BAILEY 6624665E1 FUNCTION GENERATOR MODULE D590666

BAILEY 6624665E1 FUNCTION GENERATOR MODULE D590666
BAILEY 6624665E1 FUNCTION GENERATOR MODULE D590666

BAILEY 6624665E1 FUNCTION GENERATOR MODULE D590666. Type: PCB Circuit Board. BAILEY 6624665 E 1 FUNCTION GENERATOR MODULE D 590666.

DC 9V 1602 LCD Display Digital DDS Function Signal Generator Module Sine Triangle Square Wave USB Cable 1HZ 65534HZ

DC 9V 1602 LCD Display Digital DDS Function Signal Generator Module Sine Triangle Square Wave USB Cable 1HZ 65534HZ
DC 9V 1602 LCD Display Digital DDS Function Signal Generator Module Sine Triangle Square Wave USB Cable 1HZ 65534HZ

DC 9V 1602 LCD Display Digital DDS Function Signal Generator Module Sine Triangle Square Wave USB Cable 1HZ 65534HZ. (excluding handling time). KEY FUNCTIONS: UP output waveform select DOWN output waveform select LEFT output frequency - RIGHT output frequency STOP / START the output stop / start UP key waveforms ECG electrocardiogram wave (in the OFF state, the left and right keys to set the output frequency. Weight: 0.207 kg (0.46 lb.) This functional signal generator can test many kinds of wave forms, such as: sine wave, square wave, sawtooth, reverse sawtooth, triangle wave, the ECG wave and noise wave. LCD display for clear reading, intuitive touch buttons. The item is good quality. Electronic components, coaxial connector, CCTV power jack! DDS signals: sine wave, square wave, sawtooth, reverse sawtooth, triangle wave, the ECG wave and noise wave. Features: Small size, powered by DC 9 V, easy and portable for use. DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers. DDS frequency range: 1 Hz-65534 Hz, high-speed frequency (HS) output up to 8 MHz. Middle button start, all of the following waveform set) Rev Sawtooth reverse sawtooth Saw Tooth sawtooth Triangle triangle wave Square square wave Display: 1602 LCD Operating Voltage: DC 9 V DDS Frequency Range: 1 Hz-65534 Hz Frequency (HS) Output: up to 8 MHz Section into the Value: 1, 10, 100, 1000, 10000 Hz Offset: 0.5 pp-5 Vpp Amplitude Amount: 0.5 Vpp-14 Vpp Power Cable Length: Approx. 70 cm / 27.56 in Size: 135 80 32 mm / 5.3 3.15 1.26 in Weight: 176 g / 6.21 oz Weight: 194 g / 6.86 oz 1 x DDS Function Signal Generator 1 x Power Cable.

Jillier DDS Function Signal Generator Module Waveform Sine Triangle Counter Frequency

Jillier DDS Function Signal Generator Module Waveform Sine Triangle Counter Frequency
Jillier DDS Function Signal Generator Module Waveform Sine Triangle Counter Frequency

Jillier DDS Function Signal Generator Module Waveform Sine Triangle Counter Frequency. DDS Function Signal Generator Module Waveform Sine / Triangle COUNTER Frequency.

OWON XDS3202E Oscilloscope 200Mhz 1G 2Chs 8 Bits ADC 40M Record Length 75 000 Wfms S W 3 Yrs Warranty 1Ns Div 8 Color LCD FFT USB VGA

OWON XDS3202E Oscilloscope 200Mhz 1G 2Chs 8 Bits ADC 40M Record Length 75 000 Wfms S W 3 Yrs Warranty 1Ns Div 8 Color LCD FFT USB VGA
OWON XDS3202E Oscilloscope 200Mhz 1G 2Chs 8 Bits ADC 40M Record Length 75 000 Wfms S W 3 Yrs Warranty 1Ns Div 8 Color LCD FFT USB VGA

OWON XDS3202E Oscilloscope 200Mhz 1G 2Chs 8 Bits ADC 40M Record Length 75 000 Wfms S W 3 Yrs Warranty 1Ns Div 8 Color LCD FFT USB VGA. Functions as data logger, and multimeter with data logging function. Dual-channel 25 MHz / 50 MHz arbitrary waveform generator. Multi- trigger, and bus decoding function SCPI, and Lab VIEW supported. CHP-170 Micro Cutter. Super Performance 8-bit ADC, restoring the waveform detail fully 40 M record length, and 75, 000 wfms / s waveform refresh rate low background noise, vertical sensitivity in 1 m V / div - 10 V / div multi- trigger, and bus decoding function SCPI, and Lab VIEW supported Creative New Look ultra-thin body-design, less space accommodation multi-interface integration - USB host, USB device, USB port for Pict Bridge, LAN, AUX, and more VGA port - better solution for video expansion, and teaching demonstration 8 inch 800 x 600 high resolution LCD optional multi-touch screen, more user-friendly operation experience n-in-1 functions as data logger, and multimeter with data logging function, and dual-channel 25 MHz / 50 MHz arbitrary waveform generator, furthermore, battery pack, and Wi Fi module supported Decoding Kit RS 232 RS 232 SPI SPI I 2 C I 2 C CAN CAN trigger / decoding Application electronic circuit debugging circuit testing design and manufacture education and training automobile maintenance and testing list: 1) XDS 3202 E oscilloscope 2) Power cord 3) CD Rom 4) Manual 5) USB Cable 6) Probes 7) Probes Adjust. 8 bit high resolution ADC, restoring the waveform detail fully 40 M record length, and 75, 000 wfms / s waveform refresh rate.

AD9850 DDS Signal Generator Module Board With LCD Display 6 Bands 0 55Mhz Digital Shortwave Radio Ham Receiver Kit

AD9850 DDS Signal Generator Module Board With LCD Display 6 Bands 0 55Mhz Digital Shortwave Radio Ham Receiver Kit
AD9850 DDS Signal Generator Module Board With LCD Display 6 Bands 0 55Mhz Digital Shortwave Radio Ham Receiver Kit

AD9850 DDS Signal Generator Module Board With LCD Display 6 Bands 0 55Mhz Digital Shortwave Radio Ham Receiver Kit. Supports 0 55 MHz continual adjust at 1 Hz step. Input current at 200 MA, input voltage 8-9 V would be the ideal voltage. Input voltage of 12 V can only be used for short time testing, otherwise will cause heat to board. If using AD 9851, make initial setting at 180000000.2. Press CAL then quickly release to enter step C: MIN RX DDS FREQ: Setting minimum working frequency. 1 6 correspond to 6 frequency bands: (3.8, 7, 9, 14, 18 or 21, 27 or 29). This is a 0 55 MHz DDS Signal Generator. Let go / release CAL. Use encoder switch to adjust value. This generator has 78 L 05 voltage regulate. RIT: Fine tuning to receiving frequency CAL: Set functions KB-1 and KB-2 have common shared pin, but is not GND How to operate: Press CAL, power on, then we enter setting screen. OFFSET FREQ: can be set as or - . AD 9851 set to 6-multiply frequency, AD 9850 set to 1 multiply frequency. Use encoder switch to adjust value and in accordance with STEP key. A: ENABLE 6 XREFCLE: setting chip clock mode, adjust frequency encoding setting. Minimum working frequency plus offset frequency should be high than 0 (zero). Keys Connection interfaces: ENC: Encoder switch MEM: Switch for memory mode VFO: Transfer from VFO A to VFO B, or from VFO B to VFO SSB: Working mode change: circulate from USB, LSB, AM, CW, and on and on. Press CAL then quickly release to enter next step B: DDS-SYSTEM-CLK: Chip working frequency setting. It is based on AD 9850 chip and is very easy to operate. Rotate encoder switch to change value, press STEP key, then rotate encoder switch to adjust step. AD 9851 set at oscillator 6-multiply channel, AD 9850 set at actual output of oscillator. Operate in accordance with STEP key. Press CAL then quickly release to enter step Weight: 115 g Size: 12 x 5 cm / 4.72 x 1.97 inch DDS SYSTEM CLK: can use frequency tester to get 30 MHz oscillator, multiply the tested value at 6, then put the multiplied value here.

DIY AVR DDS Function DDS Signal Generator Module Sine Triangle Square Wave

DIY AVR DDS Function DDS Signal Generator Module Sine Triangle Square Wave
DIY AVR DDS Function DDS Signal Generator Module Sine Triangle Square Wave

DIY AVR DDS Function DDS Signal Generator Module Sine Triangle Square Wave. Dedicated high speed (HS) signal output up to 8 MHz; DDS signal with variable amplitude and offset. Intuitive 5 button keypad. Restoring last configuration after power up. Frequency adjusting steps: 1, 10, 100, 1000, 10000 Hz. DDS signals: sine, square, saw, rev saw, triangle, ECG and noise. Main AVR DDS V 2.0 signal generator features: Simple circuit.

2015 Everlast Powerpro 164 160A Tig Stick Pulse 40A Plasma Cutter 110V 220V Multi Process Welder

2015 Everlast Powerpro 164 160A Tig Stick Pulse 40A Plasma Cutter 110V 220V Multi Process Welder
2015 Everlast Powerpro 164 160A Tig Stick Pulse 40A Plasma Cutter 110V 220V Multi Process Welder

2015 Everlast Powerpro 164 160A Tig Stick Pulse 40A Plasma Cutter 110V 220V Multi Process Welder. 160 A TIG / 120 A STICK / 40 a PLASMA CUTTER COMBO. 110 v and 220 v unit / IGBT Infineon Modules, inverter technology. Lightweight and portable AC DC WELDER WIT PULSE AND CUTTER. 5 Year (Parts and Labor) and 30 days money back. For best results, a higher output generator may be required. Use with generators not designated by the generator manufacturer as a clean power source may void warranty. Features Benefits - All-in-one portability - Compact, yet powerful TIG welding / Plasma cutting features - Easy to use controls with simple selector switch for process changeover - Quick change out of torches for easy change from TIG to plasma back to TIG - Low power consumption due to inverter design - High duty cycle at rated amperages for TIG / Stick / Plasma - Over Current indicator warns when duty cycle has been exceeded - OK to cut indicator lights when air pressure meets minimum required operating pressure - Clean and smooth plasma cuts on virtually any metal - Weld almost any metal - Exceptional arc stability for TIG / Stick functions For use with generators, this welder requires a MINIMUM of 10, 000 watts of continuous output and be designated as clean power by the generator manufacturer. Blue Demon ER 4043 X 1 / 16", X 36", X 1 LB Tube general purpose aluminum TIG welding rod. TIG Welding Tungsten Electrodes 2% Thoriated 1 / 16", x 7", (Red, WT 20) 10-Pack. Lincoln Electric Black One Size Flame-Resistant Welding Sleeves. TIG Welding Tungsten Electrodes 2% Thoriated 3 / 32", x 7", (Red, WT 20) 10-Pack. Blue Demon ER 4043 X 3 / 32", X 36", X 1 LB Tube general purpose aluminum TIG welding rod. Welding City 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Lanthanated (Blue, EWLa 20) 1 / 16", x 7", 10-pcs. Welding City 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Lanthanated (Blue, EWLa 20) 3 / 32", x 7", 10-pcs. TIG Welding Tungsten Electrodes 2% Lanthanated 3 / 32", x 7", (Blue, WL 20) 10-Pack. Antra AH 6-260-0000 Solar Power Auto Darkening Welding Helmet. Welding Tips Tricks Tig Finger Heat Shield. 3 / 16", weld on single pass on AC TIG - 3 / 8", on DC TIG, 5 / 8", cut on plasma.

YOKDEN GV56 Electric Power Meter 3 Phase Multi Function Voltage Current Frequency Energy Meter Panel Module Voltmeter Ammeter AC 165 275V Generator Meter

YOKDEN GV56 Electric Power Meter 3 Phase Multi Function Voltage Current Frequency Energy Meter Panel Module Voltmeter Ammeter AC 165 275V Generator Meter
YOKDEN GV56 Electric Power Meter 3 Phase Multi Function Voltage Current Frequency Energy Meter Panel Module Voltmeter Ammeter AC 165 275V Generator Meter

YOKDEN GV56 Electric Power Meter 3 Phase Multi Function Voltage Current Frequency Energy Meter Panel Module Voltmeter Ammeter AC 165 275V Generator Meter. Main Features Micro-computer Control High-lighted LED tube Indication. The output terminal is connected with relay which can burden large output current and the parameters can be set. Configurable CT Ratio (5-3000 A / 5 A) makes a wide range of current available. LED Multi-function digital power meter display 3 phase current, line voltage, frequency, accumulated time. The output terminalis connected with relay which can burden large output current and set theparameters by the buttons. Three phase current Frequency Range and accuracy AC voltage: Phase voltage AC 165-260 V, Line voltage AC 300-450 V; Deviation? Weight: 200 g Parameters display Line Voltage: L 1-L 2, L 2-L 3, L 3-L 1: Phase Voltage: L 1-N? Micro-computer control Dustproof and Waterproof grade: IP 54 Easy operation and installation, Size: 100 100 77 mm (3.94 3.94 3.03 in) Cut-out: 91 91 mm (3.58 3.58 in). Widevoltage range Power Supply: AC 165-275 V; Power Consumption: MAX: MAX 3 W Size: 100 mm 100 mm 77 mm Panel cut-out: 91 mm 91 mm Degree of Protection: IP 54 (Front Panel) Operation Temperature: 20 65? GV 56 is one multi-functional Meter used to check 3 phase current, line voltage and frequency. Auto Protection Alarm Functions: There are electricity, switch close and alarm indication as well as over frequency, over voltage and over current alarm so that the users can judge the faults occurred. It is also with the auto protection and alarm functions. Fivescreen display. Storage Condition: 40? ACpower input Configurable AC CT Ratio. 2% Frequency: 45-70 HZ; deviation? 1% (within the range) Current: 0-6000 A; deviation? There are electricity, switch close and alarm indication as well as overfrequency, over voltage and over current alarm so that the users can judge thefaults occurred.

Diybigworld AD9851 High Speed DDS Module Function Signal Generator To Send The Program Compatible With 9850 Sweep Function

Diybigworld AD9851 High Speed DDS Module Function Signal Generator To Send The Program Compatible With 9850 Sweep Function
Diybigworld AD9851 High Speed DDS Module Function Signal Generator To Send The Program Compatible With 9850 Sweep Function

Diybigworld AD9851 High Speed DDS Module Function Signal Generator To Send The Program Compatible With 9850 Sweep Function.

Geeetech SG1005 5Mhz Signal Generator Source Module DDS Function

Geeetech SG1005 5Mhz Signal Generator Source Module DDS Function
Geeetech SG1005 5Mhz Signal Generator Source Module DDS Function

Geeetech SG1005 5Mhz Signal Generator Source Module DDS Function. 10% (signal output) DC offset: 2.5 V (no load) Display: LCD 160 Frequency range: 0.01 Hz 5 MHz (SG 1005) Resolution: 0.01 Hz Frequency Stability: 1 10-6 Frequency accuracy: 5 10-6 Sine wave distortion: 0.8% (reference frequency is 1 k Hz) Trinagle linearity: 98% (0.01 Hz 10 k Hz) Rise and fall time of square wave: 100 ns Square Wave Duty range: 1% 99%. It's the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research. SG 1005 series direct digital synthesis signal generator use DDS technology and FPGA design with the characters of high stability and low distortion ect. Frequency range: 0.01 Hz 5 MHz (SG 1005) Amplitude: 3 Vp-p Fan Out: 20 TTL loads Counter Range: 0-4294967295 Frequency Meter Range: 1 Hz 60 MHz Input Voltage Range: 0.5 Vp-p 20 Vp-p Save and Load Parameter: 0-9 (0: default load) Signal Output function Output waveforms: Sine wave, Square wave and Triangle wave Output amplitude: 10 Vp-p (signal output, no load) Output impedance: 50?

Q BAIHE UDB1002S Function Signal Generator Source Frequency Counter DDS Module Wave 2Mhz

Q BAIHE UDB1002S Function Signal Generator Source Frequency Counter DDS Module Wave 2Mhz
Q BAIHE UDB1002S Function Signal Generator Source Frequency Counter DDS Module Wave 2Mhz

Q BAIHE UDB1002S Function Signal Generator Source Frequency Counter DDS Module Wave 2Mhz. Sine wave distortion: 0.8% (reference frequency is 1 k Hz) 11. Frequency Meter Range: 1 Hz 60 MHz 18. Then using the power adapter to power, The green TXD and white RXD should swap connect with our products, namely white RXD connect our products'TXD, green TXD connect our product's RXD. It's the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research. Square Wave Duty range: 1% 99% 14. Feature: Signal Generator Source Module use DDS technology and FPGA design with the characters of high stability and low distortion ect. Rise and fall time of square wave: 100 ns 13. 10% (signal output) DC offset: 2.5 V (no load) Display: LCD 1602 Frequency Stability: 1 10-6 Frequency accuracy: 5 10-6 10. Fan Out: 20 TTL loads Range: 0-4294967295 17. In addition when our machines communicate with computers, the first step to install USB to TTL drivers; The second step is to download the corresponding software; The third step is to open the software, select the appropriate channel (COM-) and baud rate of 57600 so you can communicate it! Triangle linearity: 98% (0.01 Hz 10 k Hz) 12. UDB 1002 S Function Signal Generator Source Frequency Counter DDS Module Wave 2 MHz. Frequency range: 2 MHz Resolution: 0.01 Hz Output waveforms: Sine wave, Square wave and Triangle wave Output amplitude: 10 Vp-p (signal output, no load) Output impedance: 50? Input Voltage Range: 0.5 Vp-p 20 Vp-p 19. Amplitude: 3 Vp-p 15. Save and Load Parameter: 0-9 (0 is default load) About the USB to TTL cable: Length: 1 m Chip: PL 2303 HX Line sequence is defined: red 5 V, black GND, green TXD, RXD White Red for VCC lugs, use a 5 V power supply, When the situation power supply shortage arises, you can unplug the red wire.

2Mhz Function Signal Generator Source Frequency Counter DDS Module Wave UDB1002S

2Mhz Function Signal Generator Source Frequency Counter DDS Module Wave UDB1002S
2Mhz Function Signal Generator Source Frequency Counter DDS Module Wave UDB1002S

2Mhz Function Signal Generator Source Frequency Counter DDS Module Wave UDB1002S. Rise and fall time of square wave: 100 ns 13. Input Voltage Range: 0.5 Vp-p 20 Vp-p 19. Triangle linearity: 98% (0.01 Hz 10 k Hz) 12. Output impedance: 50? Amplitude: 3 Vp-p 15. 10% (signal output) DC offset: 2.5 V (no load) Display: LCD 1602 Frequency Stability: 1 10-6 Frequency accuracy: 5 10-6 10. It's the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research Frequency range: 2 MHz Resolution: 0.01 Hz Output waveforms: Sine wave, Square wave and Triangle wave Output amplitude: 10 Vp-p (signal output, no load) Output impedance: 50? Output waveforms: Sine wave, Square wave and Triangle wave. Fan Out: 20 TTL loads Range: 0-4294967295 17. 10% (signal output). Sine wave distortion: 0.8% (reference frequency is 1 k Hz) 11. Save and Load Parameter: 0-9 (0 is default load). Frequency range: 2 MHz. Square Wave Duty range: 1% 99% 14. Resolution: 0.01 Hz. Frequency Meter Range: 1 Hz 60 MHz 18. Output amplitude: 10 Vp-p (signal output, no load). 1, for signal: Can output sine, square, triangle and sawtooth; 2, measurements: The instrument has a frequency measurement and counting functions; 3, the scan areas: SWEEP scan function enables frequency sweep; 4, and transferred functions: With 10 sets of parameters storage function, M 0 M 9, boot automatically adjust the position parameters M 0 Signal Generator Source Module use DDS technology and FPGA design with the characters of high stability and low distortion ect.

Jingrui Internet WIFI Development Board Open Source Serial Wireless Module Moudle ESP8266 CP2102 IDE Micropython

Jingrui Internet WIFI Development Board Open Source Serial Wireless Module Moudle ESP8266 CP2102 IDE Micropython
Jingrui Internet WIFI Development Board Open Source Serial Wireless Module Moudle ESP8266 CP2102 IDE Micropython

Jingrui Internet WIFI Development Board Open Source Serial Wireless Module Moudle ESP8266 CP2102 IDE Micropython. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application black. Open source serial wireless module works great with the latest for Arduino IDE / for Mongoose Io T / for Micropython. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. WIFI development board, Open source serial wireless module, Internet moudle, IDE micropython, Open source module. Works great with the latest for Arduino IDE / for Mongoose Io T / for Micropython. ESP 8266 is a highly integrated chip designed for the needs of a new connected world. Full I / O port and wireless 802.11 supported, direct download no need to reset. Features: Built-in micro-USB, with flash and reset switches, easy to program.

Yalinge DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT

Yalinge DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT
Yalinge DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT

Yalinge DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT. DDS Function Signal Generator Module Sine Square Sawtooth Triangle Wave DIY KIT.

Westsell Digital LCD AD9851 50MHZ Function Signal Generator DDS Source SCM DDS Module Sine Wave Square Wave

Westsell Digital LCD AD9851 50MHZ Function Signal Generator DDS Source SCM DDS Module Sine Wave Square Wave
Westsell Digital LCD AD9851 50MHZ Function Signal Generator DDS Source SCM DDS Module Sine Wave Square Wave

Westsell Digital LCD AD9851 50MHZ Function Signal Generator DDS Source SCM DDS Module Sine Wave Square Wave. Digital lcd AD 9851 50 MHZ Function Signal Generator DDS Source SCM DDS Module sine wave, square wave.

1PCS DDS Signal Generator FG 100 DDS Function Generator

1PCS DDS Signal Generator FG 100 DDS Function Generator
1PCS DDS Signal Generator FG 100 DDS Function Generator

1PCS DDS Signal Generator FG 100 DDS Function Generator. Square wave output suitable for oscilloscope attenuator and probe pulse characteristics adjustment. Resolution: 1 Hz The Output waveform: sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave. Output impedance: 50 ohm. DDS signal generator FG-100 DDS function generatorone. DC Offset: Max 10 V, There is a closed function. Weight (with accessories), about 0.2 kg. power supply: DC 3.5-10 VThe Recommended when using the adapter DC 5 V, Use when the battery is powered 3.7 Vlithium battery. main feature: The same time as Small size, full-featured, simple operation, easy to carry. There is a filter that can be turned on and off, and is well suited for sine and pulse waveform output. due to DDSThe good accuracy and frequency stability are also very suitable for oscilloscope scan time factor calibration. Dimension: 125 x 80 x 32.10. Can be powered by an adapter, or a lithium battery. two The Main range: sine wave 1 Hz-500 k Hz (Where the output amplitude is flat to the frequency 200 k Hz, With the frequency of further increase the output amplitude will be reduced), Other waveforms 1 Hz-20 k Hz (But the adjustable frequency cap is not limited, if the distortion and shaking requirements are not high, the use of frequency can be further increased). Sine wave distortion: 1 k Hzthe following, 1 k Hz And above The Output amplitude: maximum 10 V (P-P). Together with the oscilloscope, it can be used for electronic circuit test and commissioning, the frequency characteristics of the audio amplifier and the impulse response test and measurement.

Westsell FG 100 Module 1HZ 500Khz Digital Sine Wave DDS Function Signal Generator Sine Triangle Square Wave Sawtooth

Westsell FG 100 Module 1HZ 500Khz Digital Sine Wave DDS Function Signal Generator Sine Triangle Square Wave Sawtooth
Westsell FG 100 Module 1HZ 500Khz Digital Sine Wave DDS Function Signal Generator Sine Triangle Square Wave Sawtooth

Westsell FG 100 Module 1HZ 500Khz Digital Sine Wave DDS Function Signal Generator Sine Triangle Square Wave Sawtooth. FG-100 Module 1 HZ-500 KHz digital sine wave DDS Function Signal Generator Sine Triangle Square Wave sawtooth.

Diybigworld AD9850 Module DDS Function Signal Generator To Send 9851 Compatible With Nokia5110

Diybigworld AD9850 Module DDS Function Signal Generator To Send 9851 Compatible With Nokia5110
Diybigworld AD9850 Module DDS Function Signal Generator To Send 9851 Compatible With Nokia5110

Diybigworld AD9850 Module DDS Function Signal Generator To Send 9851 Compatible With Nokia5110.

MAX038 Function Signal Generator Module Triangular Sine Rectangular Pulse Wa

MAX038 Function Signal Generator Module Triangular Sine Rectangular Pulse Wa
MAX038 Function Signal Generator Module Triangular Sine Rectangular Pulse Wa

MAX038 Function Signal Generator Module Triangular Sine Rectangular Pulse Wa. The output signal for all waveforms is a 2 VP-P signal that is symmetrical around ground. The duty cycle can be varied over a wide range by applying a 2.3 V control signal, facilitating pulse-width modulation and the generation of sawtooth waveforms. The duty cycle and frequency controls are independent. The low-impedance output can drive up to 20 m A. Frequency modulation and frequency sweeping are achieved in the same way. The MAX 038 is a high-frequency, precision function generator producing accurate, high-frequency triangle, sawtooth, sine, square, and pulse waveforms with a minimum of external components. The output frequencycan be controlled over a frequency range of 0.1 Hz to 20 MHz by an internal 2.5 V bandgap voltage reference and an external resistor and capacitor. Chip Features: 0.1 Hz to 20 MHz Operating Frequency Range Triangle, Sawtooth, Sine, Square, and Pulse Waveforms Independent Frequency and Duty-Cycle Adjustments 350 to 1 Frequency Sweep Range 15% to 85% Variable Duty Cycle Low-Impedance Output Buffer: 0.1% Low-Distortion Sine Wave: 75% Low 200 ppm / C Temperature Drift With TTL / CMOS compatiable output Power supply: 5 V 0.1 A (single power supply) Working frequency: 0.1 Hz 20 MHz Controllable duty ratio: 15% 85% Weight: 19 g 1 x MAX 038 Module.

NJPOWER DIY KITS AVR DDS V2 0 Function Signal Generator Module Sine Triangle Square Wave Sine Square Saw Rev Triangle ECG Noise

NJPOWER DIY KITS AVR DDS V2 0 Function Signal Generator Module Sine Triangle Square Wave Sine Square Saw Rev Triangle ECG Noise
NJPOWER DIY KITS AVR DDS V2 0 Function Signal Generator Module Sine Triangle Square Wave Sine Square Saw Rev Triangle ECG Noise

NJPOWER DIY KITS AVR DDS V2 0 Function Signal Generator Module Sine Triangle Square Wave Sine Square Saw Rev Triangle ECG Noise. DIY KITS AVR DDS V 2.0 Function Signal Generator Module Sine / Triangle / Square Wave sine, square, saw, rev triangle, ECG noise.